O5/LB2008-03 Draft Proposed Replacement to section 7.5 of ANSI O5.1-200X - Specifications and Dimensions (for Wood Poles). Closed (with comments) 6/11/2008. (download the closing letter).

05/LB2008-02 Draft Proposed Revision of ANSI O5.3-2002 Solid Sawn-Wood Crossarms and Braces - Specifications and Dimensions. Closed (with comments) 6/17/2008. (download the closing letter)

05/LB2008-01 Draft Proposed Revision of ANSI O5.1-2002 - Specifications and Dimensions (for Wood Poles). Closed (with comments) 6/11/2008. (download the closing letter)

O5/LB2007-01 Accredited Standards Committee O5 Adoption of ASC O5 Operating Procedures (OP). Issued 06/12/2007. Closed (with comments) 07/27/2007 (download the closing letter)

O5/LB2005-03 Draft Proposed Revision of ANSI O5.1-2002 - Specifications and Dimensions (for Wood Poles). Issued 05/20/2005. Closed (with comments) 06/17/2005 (download the closing letter).

O5/LB2005-02 Draft Proposed Revision of ANSI O5.2-1996(R2001) - Structural Glued Laminated Timber for Utility Structures. Issued 05/05/2005. Closed 06/02/2005 (with comments [originally as a proposed reaffirmation]). Default LB issued 07/31/2006; closed 08/31/2006 - all comments resolved. To be published as ANSI O5.2-2006.

O5/LB2005-01 Draft Proposed Supplement to ANSI O5.1-2002. Issued 02/15/2005. Closed 03/28/2005 with two negatives. This letter ballot was withdrawn at the April 20, 2005, O5 meeting in favor of incorporating this and other proposed changes into the 2005 proposed revision of O5.1.

O5/LB2004-02 Committee O5 Adoption of ATIS Operating Procedures (OP). Issued 12/20/2004. Closed 01/31/2005. Approved by Committee O5.

O5/LB2004-01 Draft Proposed Supplement to ANSI O5.1-2002 and Consolidation of ANSI O5.1a-2003 and O5.1b-2003. Issued 07/15/2004. Closed 08/26/2004. Approved by ANSI on December 15, 2004, and published as ANSI O5.1c-2004.

O5/LB2003-01 Draft Proposed Supplement to ANSI O5.1-2002. Issued 05/08/2003. Closed 06/19/2003 with no comments. Approved by ANSI on October 22, 2003. Published as ANSI O5.1b-2003.

O5/LB2002-03 Draft Proposed Technical Report - Photographic Manual of Wood Pole Characteristics (based on ANSI O5.1). 2nd Default Letter Ballot closed 6/4/2004. Approved by Committee O5 as O5.TR.01-2004.

O5/LB2002-02 Draft Proposed Supplement to ANSI O5.1-2002. Issued 05/03/2002. Closed 06/14/2002 with 6 disapprovals and a set of comments. All disapprovals removed, and Approved by ANSI on June 12, 2003. Published as ANSI O5.1a-2003.

O5/LB2002-01 Membership Request from Outside Plant Consulting Services, Inc. Issued 01/25/2002. Closed 03/08/2002. Approved as an O5 Voting member in the GI category.

O5/LB2001-02 Proposed Reaffirmation of ANSI O5.2-1996 - Structural Glued Laminated Timber for Utility Structures. Issued 05/10/2001 and closed on 06/21/2001 with no proposed changes. Approved via ANSI on 9/21/2001 as ANSI O5.2-1996(R2001).

O5/LB2001-01 Draft Proposed Revision of ANSI O5.3-1995 on Solid Sawn-Wood Crossarms and Braces - Specifications and Dimensions (download the summary of proposed changes). Issued 05/10/2001 and closed on 06/21/2001 (download the closing letter, with comments). Approved via ANSI on 07/10/2002 as ANSI O5.3-2002.

O5/LB99-02 dpANS - Revision of O5.1-1992 on Specifications and Dimensions. Issued 08/04/1999 and closed on 09/15/1999 with 5 comments and one late negative vote. Approved to send to default letter ballot from the April 26-27, 2001, Committee O5 meeting in Madison, WI, which closed on July 2, 2001 (download the default closing letter, with comments). Second default letter ballot issued 12/20/2001 (download revised balloted document). Approved by ANSI on March 6, 2002, and published as ANSI O5.1-2002.

O5/LB99-01 Membership requested by Telcordia Technologies. Issued 05/5/1999 and closed on 07/16/1999 with comments. Comments resolved, and Telcordia Technologies approved as a new member.

O5/LB98-01 Membership requested by Southern California Edison. Issued 05/22/1998 and closed on 07/03/1998 with 2 affirmative comments. Comments resolved, and Southern California Edison approved as a new member.

O5/LB97-01 Requirements and Procedures for "Consideration of Foreign Species" into ANSI O5.1 Revision. Ballot closed 10/10/1997 with 6 disapprovals. Les Lonning drafted letters to negative voters as per 3/25-26/1998 O5 meeting, and all negatives were withdrawn, and document approved.

O5/LB96-02 Membership request by the Southern Pine Inspection Bureau (SPIB). Ballot closed 01/30/97.

O5/LB96-01 Membership request from the National Rural Electric Cooperative Association (NRECA). Ballot closed 11/20/96.

O5/LB95-01 dpANS - Revision of ANSI O5.2-1983 on Wood Products Structural Glued Laminated Timber for Utility Structures. Ballot closed 5/29/95 with 3 disapprovals. ANSI Public Review closed on 9/5/95. ANSI Second Public Review closed 09/17/96. Approved by ANSI on 12/16/96 and designated O5.2-1996.

O5/LB94-04 dpANS - Solid-Sawn Wood Crossarms and Braces - Specifications and Dimensions, Revision of ANSI O5.3-1989 and ANSI O5.3a-1991. Ballot closed 8/29/94. Defaulted and closed 2/13/95. BSR8 closed on 7/25/95. Approved by ANSI on 08/24/95 and designated O5.3-1995.

O5/LB94-03 Proposed Revision to ANSI O5.2-1983 on Structural Glued Laminated Timber for Utility Structures. Ballot closed 4/12/94. No comments returned. Ballot withdrawn at 3/15-16/94 meeting.

O5/LB94-02 Proposed Reaffirmation/Revision to ANSI O5.3-1989 and O5.3a-1991 on Solid-Sawn - Wood Crossarms and Braces - Specifications and Dimensions. Ballot closed 4/12/94. Not comments returned. Ballot withdrawn at 3/15-16/94 meeting.

O5/LB94-01 dpANS - Partial Revision/Supplement to ANSI O5.3-1989 on Solid-Sawn - Wood Crossarms and Braces - Specifications and Dimensions. Ballot closed 3/23/94. Comments from ASTM (disapproval), Commercial Inspection Co. (disapproval) and Forest Products Lab (disapproval). Ballot withdrawn at 3/15-16/94 meeting.

O5.4 Draft Ballot number not designated. dpANS for Wood Poles - Strength Classification. Ballot closed 1/19/93 with fourteen sets of comments.

O5/LB92-02 Requests for Committee Membership. Ballot closed 1/19/93.

O5/LB92-01 Draft Modifications to ANSI O5.2. Ballot closed 1/19/93.

O5/LB91-01 dpANS - Specifications and Dimensions for Wood Poles (Revision of ANSI O5.1-1987). Ballot closed 3/7/91. Approved by ANSI on 01/23/92 and designated O5.1-1992.

O5/LB89-01 Proposed changes to the American National Standard - Specifications and Dimensions for Solid Sawn Wood Crossarms and Braces. ANSI O5.3. Ballot closed 8/2/89. Designated O5.3a-1991.

O5/LB88-06 Reaffirmation of ANSI O5.2-1983 on Wood Products - Structural Glued Laminated Timber for Utility Structures. Ballot closed 2/3/89.

O5/LB88-05 dpANS - Specifications and Dimensions for Solid Sawn Wood Crossarms and Braces - 9th Draft. Ballot closed 1/10/89. Designated ANSI O5.3-1989.

O5/LB88-04 Substantive Changes to ANSI O5.1. Approved at the O5 Committee Annual Meeting. Ballot closed 10/31/88.

O5/LB88-03 The term "decay" in ANSI O5.1-1987. Ballot closed 10/31/88 with 4 disapprovals and 2 approvals.

O5/LB88-02 Update of the Red Pine Properties of ANSI O5.1-1987 Table C1 of Appendix C. Ballot closed 10/31/88.

O5/LB88-01 dpANS - Wood Telephone Pedestal Stubs. Ballot closed 10/31/88.

O5/LB87-01 dpANS - Specifications and Dimensions for Wood Poles. Ballot closed 6/29/87. Designated ANSI O5.1-1987.

O5/LB86-01 dpANS - Specifications and Dimensions for Wood Poles. Ballot closed 11/10/86. Revision of O5.1-1979.